Skip to content

Easy Hard disk drive Setup

Posted in Technology

Including an additional hard drive to your computer system is a really easy and straight ahead. To maintain this tutorial simple, we are going to talk about the 2 most common hard drive upgrades on the market as of this writing-The SATA hard drive and the IDE hard drive. You will need a Phillips head screwdriver light and you could additionally need a Y-Power cable television if a complimentary power port from your power supply isn’t really available.

SETTING UP THE NEW DRIVE

For the most parts you could use the existing Ribbon data cable television for IDE drives. Otherwise you will need to purchase cable television for your brand-new hard drive if it does not consist of one. Your sales individual could assist you to pick the correct cable for your new drive. Your present disk drive will be the Key Master. If you are mounting an SATA drive you could require a power adapter cord or make sure you have an open SATA power adapter. What’s the Recommended ps4 hdd Upgrade Size? This will supply your brand-new disk drive with power.

CHOOSING A NEW HARD DISK DRIVE

To start, close down your computer system and unplug the power cable from your computer and eliminate system situation. The system situation will result differently depending on the maker of your computer system. Once you have the situation eliminated take a look inside to see where your new hard disk drive is going to be installed. More than likely you will see an empty bay just below where your present disk drive is mounted.

Easy Hard disk drive SetupThis will be the most convenient area to install the hard drive. As soon as you have picked an empty bay, you will establish the jumpers prior to you install the hard disk drive. To add an extra IDE drive to your existing computer system you could set the jumpers.

A jumper is a tiny plastic port that connects two pins with each other to permit you to transform the drive placement. You will also require an information card to connect your new hard drive to your MOBO. Examine your system to establish if you need a power wire or information card.